T-LLG / LLG
Sight Gauges
Lenz Inc announces three new sight level gauges (From left to right in image):
  • 10 Inch Bolt Centers (Part Number -- TLLG-10/LLG-10)
  • 5 Inch Bolt Centers (Part Number -- TLLG-5/LLG-5)
  • 3 Inch Bolt Centers (Part Number -- TLLG-3/LLG-3)

    These Sight Gauges feature:
  • 1/2 Inch Thread Bolts / M12 Bolts Optional
  • M10 Bolts Available 3 "
  • Low Cost
  • Metal Housing

    Click for spec sheet

    Click for instructions

    See Products Page

    Click for a larger image.

  • Tank Mount Filters
    Lenz Inc announces new Tank Mounted Filters:
  • Cannister Filters / Disposable Type
  • Return Line Application
  • Model "LTT" Series LTT-15,30.60
  • Working Pressure 100 PSI
  • Operating Temp: -22F to + 212F (-32C to +100C)
  • Flows Up to 60 GPM, 227 LPM
  • 3/4, 1 1/2 NPT Ports, Aluminum Casting
  • Buna Seals
  • Visual Indicators

    Click for spec sheet

    See Products Page


    Click for a larger image.

  • Air Breather Filter
    Lenz Air Breather Filter protects your hydraulic system from ingesting airborne particles. These Breathers feature a large pleated surface area which remove airborne particles as small as 10 micron. Exceptional dirt holding capacity that extends the life of the breather and thus the length of time between servicing. Adapters allow easy spin-on/ spin off replacement of air breather. High capacity air flow.

    See Products Page


    Click for a larger image.

    New Design: Diffusers
    NEW DESIGN: DIFFUSERS
    Port sizes: 3/4"-3"NPT
    GPM Rating: 13-250 GPM

    Benefits:
    Installing a Lenz Diffuser in a hydraulic reservoir is a simple change that can make a dramatic difference in system efficiency. With special concentric tubes designed with discharge holes 180 degree opposed, fluid aeration, foaming and reservoir noise are reduced. Pump life is also extended by reducing cavitation to the pump inlet.Plain area should face pump inlet.


    Click for a larger image.


    NY / AS-NY / NY-DIP
    Breathers
    These low cost breathers feature a 10 micron element.
    Also offered on these breathers as options:
  • Anti splash disc where strong movement of oil causes sploshing
  • Dipstick / Anti-splash disc combination
  • Press fit with O-Ring for seal

    Offered standard with 1/4, 3/8, 1/2, 3/4, and 1 inch NPT threads.
    Optional threads include: 1/4, 3/8, 1/2, 3/4 and 1 inch BSP threads.

    See Products Page


    Click for a larger image.

  • Breathers
  • NY-7-12 ( 3/4  NPT/70 MM Diameter Cap)
  • NY-7-16 ( 1  NPT/70MM Diameter Cap)
  • NY-7-20 (1-1/4  NPT/ 70 MM Diameter Cap)
  • Options: 10 or 40 micron element
  • Anti-splash
  • Dipstick

    See Products Page


    Click for a larger image.

  • NY-LSW / NY-PF
    Sight Windows
    Lenz Inc announces new sight windows, featuring:
  • High density polymide resin
          The resin offers high mechanical resistance, withstands oil, gasoline fuel, and most solvents
  • U.V. Resistant
  • Red Dot Registration
  • BSP Threads (3/8, 1/2, 3/4, 1, 1 1/4, 1 1/2 inch BSP)
  • Reflector Optional
  • Press fit (20MM, 26MM, 32MM, 38MM, 40MM)

    Note ** N.P.T. and S.A.E. threads in production.

    See Products Page


    Click for a larger image.


  • CP-1520-10P
  • Over/Under Filter
  • 100 Gallons Per Minute (GPM) Flow Capacity
  • 1 1/4" NPT Threads
  • 5,15,25 P.S.I. Bypass Valves
  • 200 P.S.I. Working Pressure

    See Products Page


    Click for a larger image.

  • CPL-1280-10P-50
  • Extended Length Canister Filter
  • 1 1/4" NPT Threads
  • 50 GPM Flow Capacity
  • 3,5,15,25 P.S.I. Bypass Valves
  • Dual Post to Accept 1 1/2-16UN; 1 1/4" BSP Canisters

    See Products Page


    Click for a larger image.

  • CPL-750 / CPL-1000
  • Extended Length Canister Filter
  • Offered in 3/4" and 1" NPT/SAE Threads
  • 5,15,25 P.S.I. Bypass Valves
  • 200 P.S.I. Working Pressure

    See Products Page


    Click for a larger image.

  • DUAL-CP-1500-10P-80
  • 1 1/4" NPT Port
  • 1 7/8"-12 SAE Port
  • 80 GPM Flow Capacity
  • 5,15,25 P.S.I. Bypass Valves Available
  • 200 P.S.I. Working Pressure
  • 10,25,140 Micron
  • 10 Micron Synthetic

    See Products Page


    Click for a larger image.

  • CP-750 / CP-1000
  • New Filter Head Design
  • 18 GPM Flow Capacity
  • 200 P.S.I. Working Pressure
  • 2 1/2,5,15,25 P.S.I. Bypass Valves Settings
  • 3,10,25 Micron
  • 140 Micron
  • 10 Micron Synthetic
  • 10 Micron Water Removal
  • 1/2", 3/4", 1", NPT Ports
  • 3/4"-16, 1 1/16" SAE Ports

    See Products Page


    Click for a larger image.

  • CP-250 / CP-380
    Features:
  • Perfect for small power units, lawnmowers, augers lubrication equipment
  • 7 GPM (Return) and 2 GPM (Suction)
  • 200 PSI Maximum Operating Pressure
  • Bypass: 18, 25, 40 PSI

    Threads:
  • 1/4 inch NPTF     CP-250-1018
  • 3/8 inch NPTF     CP-380-1018
  • 9/16 inch - 18 (SAE-6)     CPA-380-1018
  • Optional Filters:
                -1025
                -4040
                -2525
                -4018


    See Products Page


    Click for a larger image.

  • DP Filter Indicator
    New low cost filter indicator for Lenz CP-1280-10P-50 Filters (1 1/4 Inch - #20 SAE Thread)
    Features:
  • Simple sliding indicator
  • Shows green for clean
  • Red to indicate dirty filter elements
  • 200 deg F service
  • 300 P.S.I. Working Pressure
  • Can be seen from both sides of filter


    Click for a larger image.

  • Oil Dipsticks
    Features:
  • Press fit
  • Single (top in picture) or double O-Ring (below in picture) for positive seal
  • Dipsticks custom length on orders over 200 pieces - Min / Max Option
  • Low Cost
  • Part number - PF-DIP

    See Products Page


    Click for a larger image.

  • Desiccant Breathers
    These Desiccant Breathers feature:
  • Safe - environmental friendly for disposal
  • Removes corrosive water vapor
  • Four sizes (3 inch to 10 inch)
  • Silica Gel turns from Gold to Green when maximum absorption is reached
  • 2 micron filtration
    Part Numbers: Adapters:
    DB-03 DB-FA
    DB-05 DB-R1/2
    DB-08 DB-BA
    DB-10 DB-C1/2


    See Products Page


    Click for a larger image.

  • LW-BA Weld Adapters
    Lenz 'LW-BA' Weld Adapters are designed and machined with a pilot to accurately position the adapter to the hole opening for welding flush to the outside of the tank. The Weld Adapter is a female S.A.E. O-Ring connector for Lenz S.A.E. male straight thread fittings or any other Lenz hydraulic component with a male S.A.E. straight thread, making for a leak-free installation.

    Lenz 'LW-BA' Weld Adapters are precision machined from steel (stainless steel optional), unplated, but oiled to prevent corrosion. Available in nine sizes from stock.

    See Products Page


    Click for a larger image.


    AN-WB Weld Bushings
    Lenz 'AN-WB' Weld Bushings are designed and machined with a recessed pilot to accurately position the adapter to the hole opening for welding flush during welding phase to the outside of the tank (the female S.A.E. 'O-Ring' connection on top or side of the tank) to save time and labor when installing components or accessories. (examples: S.A.E. hydraulic fittings to suction strainers or a return line diffuser) for leak-free installation.

    Lenz 'AN-WB' Weld Bushings are precision machined from steel (stainless steel optional), unplated, but oiled to prevent corrosion. Available in seven sizes from stock.

    See Products Page


    Click for a larger image.


    AFC-20 / AFC-20-RC
    2 Inch Glycerin Filled Gauge
    This new 2 inch Glycerin filled gauge is ideal for
  • Compressors
  • Power Units
  • Mobile Applications
  • Pressure Ranges 30" HG to 5,000 P.S.I.

    Also comes in bottom mount connection.

    See Products Page


    Click for a larger image.

  • Low Pressure Gauges
    Extremely Sensitive and Highly Accurate!
    These gauges have a capsule that is designed to measure pressure and vacuum.
    Recalibration screw on dial to rezero pointer if necessary.

    Models:
  • LOW-30-H20-25
  • LOW-03-25
  • LOW-05-25
  • LOW-10-25

    See products page


    Click for a larger image.

  • LITB In-Tank Filter / Breather
    Specifications
  • Working pressure 150 PSI (7 Bar )
  • Operating Temperatures -22° F to +212° F (-32° C to +100° C)
  • ;Flows to 40 GPM (150 LPM) Return
  • 1/2", 3/4", 1" Ports
  • 10 or 40 micron breathers
  • Aluminum casting, nylon lid
  • Buna Seals
  • For use with petroleum based, high water water glycols and water/oil emulsions fluids
  • Three nylon bowl lengths
  • 3-10 (lbs.) , 1.4-4.5 (kgs.) shipping weight Options
  • NPT or SAE Ports
  • 3, 10, 25, 100 micron cellulose, synthetic elements
  • Viton seals optional
  • Visual or electrical indicators
  • 25, blocked bypass options for return
  • Dipsticks available



    See products page


    Click for a larger image.

  • AMM-25 / AMM-4
    Ammonia Gauge
    Lenz Inc announces new Ammonia Gauges:
  • 2 1/2 Inch & 4 Inch Dials (1/4 Inch NPT)
  • Suitable for Refrigeration Ammonia
  • All Stainless Steel
  • 30 Inch - 0 - 150 PSI / 84 Deg F
  • 30 Inch - 0 - 300 PSI / 126 Deg F

    See products page


    Click for a larger image.

  • MC-12
    Lenz Inc announces the MC-12 Return Line Gauge:
  • 2" Multicolor for 15 PSI Filter Applications
  • 0-12 PSI Green
  • 12-15 PSI Yellow
  • 15-60 PSI Red (Service Filter)

    See products page


    Click for a larger image.

  • MC-20
    Lenz Inc announces the MC-20 Return Line Indicating Gauge:
  • 2" Multicolor for 25 PSI Filter Applications
  • 0-20 PSI Green
  • 21-24 PSI Yellow
  • 25-60 PSI Red (Service Filter)

    See products page


    Click for a larger image.

  • GLY-MC-20
    Glycerin Filled
    Return Line Indicating Gauge:
  • 2" Multicolor for 25 PSI Filter Applications
  • 0-20 PSI Green
  • 21-24 PSI Yellow
  • 25-60 PSI Red (Service Filter)

    See products page



  • 135080
    Lenz Inc announces the Suction Line Indicating Gauge:
  • Multicolor for 5 PSI Vacuum Filter Applications
  • 2" Multicolor
  • 0-9 HG Green
  • 9-11 HG Yellow
  • 11-30 HG Red (Service Filter)

    See products page



  • CP-2
    Lenz Inc announces the Compound Indicating Gauge(Suction or Return Line):
  • 10" to 30" Vacuum is a Red Danger Area
  • A Red "Change Filter" Sticker for the pressure side is included with each gauge for applicataion after the pressure factor is determined.

    See products page



  • VAC-3-20
    Lenz Inc announces the Suction Line Indicating Gauge:
  • 2" Multicolor for 3 PSI Vacuum Filters Applications
  • 0-3 HG Green
  • 4-6 HG Yellow
  • 6-30 HG Red (Service Filter)

    See products page




  • [Products]-[ Catalogs]-[ News]-[ Services]-[ Table of Contents]-[ Search]-[ About Lenz]-[ Contact Us]

    Lenz has made every effort to assure the accuracy of the information contained in this web site. However, Lenz expressly disclaims any and all liability for the contents of this web site including, but not limited to, errors, inaccuracies, misstatements, omissions and any incidental or consequential damages which may occur as the result of relying on this information.