T-LLG / LLG
Sight Gauges
Lenz Inc announces three new sight level gauges (From left to right in image):
10 Inch Bolt Centers (Part Number -- TLLG-10/LLG-10)
5 Inch Bolt Centers (Part Number -- TLLG-5/LLG-5)
3 Inch Bolt Centers (Part Number -- TLLG-3/LLG-3)
These Sight Gauges feature:
1/2 Inch Thread Bolts / M12 Bolts Optional
M10 Bolts Available 3 "
Low Cost
Metal Housing
Click for spec sheet
Click for instructions
See Products Page
Click for a larger image.
|
Tank Mount Filters
Lenz Inc announces new Tank Mounted Filters:
Cannister Filters / Disposable Type
Return Line Application
Model "LTT" Series LTT-15,30.60
Working Pressure 100 PSI
Operating Temp: -22F to + 212F (-32C to +100C)
Flows Up to 60 GPM, 227 LPM
3/4, 1 1/2 NPT Ports, Aluminum Casting
Buna Seals
Visual Indicators
Click for spec sheet
See Products Page
Click for a larger image.
|
Air Breather Filter
Lenz Air Breather Filter protects your hydraulic system from ingesting airborne particles.
These Breathers feature a large pleated surface area which remove airborne particles as small as 10 micron.
Exceptional dirt holding capacity that extends the life of the breather and thus the length of time between servicing.
Adapters allow easy spin-on/ spin off replacement of air breather.
High capacity air flow.
See Products Page
Click for a larger image.
|
New Design: Diffusers
NEW DESIGN: DIFFUSERS
Port sizes: 3/4"-3"NPT
GPM Rating: 13-250 GPM
Benefits:
Installing a Lenz Diffuser in a hydraulic reservoir is a simple change that can make a dramatic difference in system efficiency.
With special concentric tubes designed with discharge holes 180 degree opposed, fluid aeration, foaming and reservoir noise are reduced.
Pump life is also extended by reducing cavitation to the pump inlet.Plain area should face pump inlet.
Click for a larger image.
|
NY / AS-NY / NY-DIP
Breathers
These low cost breathers feature a 10 micron element.
Also offered on these breathers as options:
Anti splash disc where strong movement of oil causes sploshing
Dipstick / Anti-splash disc combination
Press fit with O-Ring for seal
Offered standard with 1/4, 3/8, 1/2, 3/4, and 1 inch NPT threads.
Optional threads include: 1/4, 3/8, 1/2, 3/4 and 1 inch BSP threads.
See Products Page
Click for a larger image.
|
Breathers
NY-7-12 ( 3/4 NPT/70 MM Diameter Cap)
NY-7-16 ( 1 NPT/70MM Diameter Cap)
NY-7-20 (1-1/4 NPT/ 70 MM Diameter Cap)
Options: 10 or 40 micron element
Anti-splash
Dipstick
See Products Page
Click for a larger image.
|
NY-LSW / NY-PF
Sight Windows
Lenz Inc announces new sight windows, featuring:
High density polymide resin
The resin offers high mechanical resistance, withstands oil, gasoline fuel, and most solvents
U.V. Resistant
Red Dot Registration
BSP Threads (3/8, 1/2, 3/4, 1, 1 1/4, 1 1/2 inch BSP)
Reflector Optional
Press fit (20MM, 26MM, 32MM, 38MM, 40MM)
Note ** N.P.T. and S.A.E. threads in production.
See Products Page
Click for a larger image.
|
CP-1520-10P
Over/Under Filter
100 Gallons Per Minute (GPM) Flow Capacity
1 1/4" NPT Threads
5,15,25 P.S.I. Bypass Valves
200 P.S.I. Working Pressure
See Products Page
Click for a larger image.
|
CPL-1280-10P-50
Extended Length Canister Filter
1 1/4" NPT Threads
50 GPM Flow Capacity
3,5,15,25 P.S.I. Bypass Valves
Dual Post to Accept 1 1/2-16UN; 1 1/4" BSP Canisters
See Products Page
Click for a larger image.
|
CPL-750 / CPL-1000
Extended Length Canister Filter
Offered in 3/4" and 1" NPT/SAE Threads
5,15,25 P.S.I. Bypass Valves
200 P.S.I. Working Pressure
See Products Page
Click for a larger image.
|
DUAL-CP-1500-10P-80
1 1/4" NPT Port
1 7/8"-12 SAE Port
80 GPM Flow Capacity
5,15,25 P.S.I. Bypass Valves Available
200 P.S.I. Working Pressure
10,25,140 Micron
10 Micron Synthetic
See Products Page
Click for a larger image.
|
CP-750 / CP-1000
New Filter Head Design
18 GPM Flow Capacity
200 P.S.I. Working Pressure
2 1/2,5,15,25 P.S.I. Bypass Valves Settings
3,10,25 Micron
140 Micron
10 Micron Synthetic
10 Micron Water Removal
1/2", 3/4", 1", NPT Ports
3/4"-16, 1 1/16" SAE Ports
See Products Page
Click for a larger image.
|
CP-250 / CP-380
Features:
Perfect for small power units, lawnmowers, augers lubrication equipment
7 GPM (Return) and 2 GPM (Suction)
200 PSI Maximum Operating Pressure
Bypass: 18, 25, 40 PSI
Threads:
1/4 inch NPTF CP-250-1018
3/8 inch NPTF CP-380-1018
9/16 inch - 18 (SAE-6) CPA-380-1018
Optional Filters:
-1025
-4040
-2525
-4018
See Products Page
Click for a larger image.
|
DP Filter Indicator
New low cost filter indicator for Lenz CP-1280-10P-50 Filters (1 1/4 Inch - #20 SAE Thread)
Features:
Simple sliding indicator
Shows green for clean
Red to indicate dirty filter elements
200 deg F service
300 P.S.I. Working Pressure
Can be seen from both sides of filter
Click for a larger image.
|
Oil Dipsticks
Features:
Press fit
Single (top in picture) or double O-Ring (below in picture) for positive seal
Dipsticks custom length on orders over 200 pieces - Min / Max Option
Low Cost
Part number - PF-DIP
See Products Page
Click for a larger image.
|
Desiccant Breathers
These Desiccant Breathers feature:
Safe - environmental friendly for disposal
Removes corrosive water vapor
Four sizes (3 inch to 10 inch)
Silica Gel turns from Gold to Green when maximum absorption is reached
2 micron filtration
|
Part Numbers:
|
Adapters:
|
|
DB-03
|
DB-FA
|
|
DB-05
|
DB-R1/2
|
|
DB-08
|
DB-BA
|
|
DB-10
|
DB-C1/2
|
See Products Page
Click for a larger image.
|
LW-BA Weld Adapters
Lenz 'LW-BA' Weld Adapters are designed and machined with a pilot to accurately position the adapter to the hole opening for welding flush to the outside of the tank. The Weld Adapter is a female S.A.E. O-Ring connector for Lenz S.A.E. male straight thread fittings or any other Lenz hydraulic component with a male S.A.E. straight thread, making for a leak-free installation.
Lenz 'LW-BA' Weld Adapters are precision machined from steel (stainless steel optional), unplated, but oiled to prevent corrosion. Available in nine sizes from stock.
See Products Page
Click for a larger image.
|
AN-WB Weld Bushings
Lenz 'AN-WB' Weld Bushings are designed and machined with a recessed pilot to accurately position the adapter to the hole opening for welding flush during welding phase to the outside of the tank (the female S.A.E. 'O-Ring' connection on top or side of the tank) to save time and labor when installing components or accessories. (examples: S.A.E. hydraulic fittings to suction strainers or a return line diffuser) for leak-free installation.
Lenz 'AN-WB' Weld Bushings are precision machined from steel (stainless steel optional), unplated, but oiled to prevent corrosion. Available in seven sizes from stock.
See Products Page
Click for a larger image.
|
AFC-20 / AFC-20-RC
2 Inch Glycerin Filled Gauge
This new 2 inch Glycerin filled gauge is ideal for
Compressors
Power Units
Mobile Applications
Pressure Ranges 30" HG to 5,000 P.S.I.
Also comes in bottom mount connection.
See Products Page
Click for a larger image.
|
Low Pressure Gauges
Extremely Sensitive and Highly Accurate!
These gauges have a capsule that is designed to measure pressure and vacuum.
Recalibration screw on dial to rezero pointer if necessary.
Models:
LOW-30-H20-25
LOW-03-25
LOW-05-25
LOW-10-25
See products page
Click for a larger image.
|
LITB In-Tank Filter / Breather
Specifications
Working pressure 150 PSI (7 Bar )
Operating Temperatures -22° F to +212° F (-32° C to +100° C)
;Flows to 40 GPM (150 LPM) Return
1/2", 3/4", 1" Ports
10 or 40 micron breathers
Aluminum casting, nylon lid
Buna Seals
For use with petroleum based, high water water glycols and water/oil emulsions fluids
Three nylon bowl lengths
3-10 (lbs.) , 1.4-4.5 (kgs.) shipping weight Options
NPT or SAE Ports
3, 10, 25, 100 micron cellulose, synthetic elements
Viton seals optional
Visual or electrical indicators
25, blocked bypass options for return
Dipsticks available
See products page
Click for a larger image.
|
AMM-25 / AMM-4
Ammonia Gauge
Lenz Inc announces new Ammonia Gauges:
2 1/2 Inch & 4 Inch Dials (1/4 Inch NPT)
Suitable for Refrigeration Ammonia
All Stainless Steel
30 Inch - 0 - 150 PSI / 84 Deg F
30 Inch - 0 - 300 PSI / 126 Deg F
See products page
Click for a larger image.
|
MC-12
Lenz Inc announces the MC-12 Return Line Gauge:
2" Multicolor for 15 PSI Filter Applications
0-12 PSI Green
12-15 PSI Yellow
15-60 PSI Red (Service Filter)
See products page
Click for a larger image.
|
MC-20
Lenz Inc announces the MC-20 Return Line Indicating Gauge:
2" Multicolor for 25 PSI Filter Applications
0-20 PSI Green
21-24 PSI Yellow
25-60 PSI Red (Service Filter)
See products page
Click for a larger image.
|
GLY-MC-20
Glycerin Filled
Return Line Indicating Gauge:
2" Multicolor for 25 PSI Filter Applications
0-20 PSI Green
21-24 PSI Yellow
25-60 PSI Red (Service Filter)
See products page
|
135080
Lenz Inc announces the Suction Line Indicating Gauge:
Multicolor for 5 PSI Vacuum Filter Applications
2" Multicolor
0-9 HG Green
9-11 HG Yellow
11-30 HG Red (Service Filter)
See products page
|
CP-2
Lenz Inc announces the Compound Indicating Gauge(Suction or Return Line):
10" to 30" Vacuum is a Red Danger Area
A Red "Change Filter" Sticker for the pressure side is included with each gauge for applicataion after the pressure factor is determined.
See products page
|
VAC-3-20
Lenz Inc announces the Suction Line Indicating Gauge:
2" Multicolor for 3 PSI Vacuum Filters Applications
0-3 HG Green
4-6 HG Yellow
6-30 HG Red (Service Filter)
See products page
|
